Internorm
This future-orientated enclosure system is designed to match your electronics! A wide range of products for:
- equipment construction
- control enclosures
- laboratory equipment
- data recording / transfer
- EDP periphery enclosures
- 19″ technology, designed for mounting racks acc. to DIN IEC 60297-3
Internorm is the result of the most modern design in the 19″ sector. The use of polystyrene leads to a high degree of robustness plus surprisingly low weight coupled with the finest surface quality. The constructional design, with IP 54 ingress protection, permits the use of the same base parts as desktop or wall enclosures in all sizes.
Features:
Can be exteded easily from 3 HE to 15 HE using 1 HE extensions sets. Available from stock; as a vertical enclosure (IN…V). IP 54 front door, to lock, available as an accessory.
Enclosure:
When using order code IN…(L) you will receive only the two enclosure half-shells with pre-mounted covering caps and set-up. In addition, the following accessories are required:
Corner profiles:
2x corner profile set PEK 00…, if you want to use the enclosure as a desktop enclosure, or: 1x PEK 00… and 1x wall fixing profile PEW 00…, if you require the enclosure as a wall-mounted enclosure.
Mounting profiles:
2x mounting profile PM 00…, if you want to use the enclosure as an equipment enclosure, with slot-in front panels on both sides, or: 1x mounting profile PM 00… and 1x 19″ profile set PZ 00…, if you want to use mounting racks at front and rear or a screw-on front panel, or: 2x 19″ profile set PZ00…, if you want to use mounting racks at front and rear or a screw-on front panel.
Extensions sets:
AB…100(L), if enclosue heigth is different from the standar height=3HE. 1 set = 2 pcs for an extension of 1HE
Accessories:
Slot-in front panels (Al and plastic), screw-on front panels, sloot-in front panels (IP 54), seals, EMC seals, front doors, handles and slide rails for easier mounting of heavy mounting racks.
Further Information
Please visit www.bopla.de for detailed product information, including specific product dimensions, CAD drawings, 3D Tools and much more.